{"id":948,"date":"2026-07-15T09:40:16","date_gmt":"2026-07-15T09:40:16","guid":{"rendered":"https:\/\/altaintegra.com\/insight\/history-and-comparison-of-building-acoustic-noise-ratings\/"},"modified":"2026-08-25T13:27:24","modified_gmt":"2026-08-25T13:27:24","slug":"noise-rating-curves-compared","status":"publish","type":"insight","link":"https:\/\/altaintegra.com\/zh\/insight\/noise-rating-curves-compared\/","title":{"rendered":"Noise Rating Curves Compared: NC, PNC, RC, NCB and RC Mark II"},"content":{"rendered":"<p class=\"ins-p\">Five <a href=\"https:\/\/en.wikipedia.org\/wiki\/Noise_criterion\" target=\"_blank\" rel=\"noopener\">noise rating<\/a> systems have shaped building acoustic design since 1957, and choosing the right noise rating method still matters (Noise Criteria (NC), Preferred Noise Criteria (PNC), Room Criteria (RC), Balanced Noise Criteria (NCB) and RC Mark II). Each was published to correct a specific shortcoming in the one before it.<\/p>\n<p class=\"ins-p\">Knowing which correction each represents is what tells you when to use it. Knowing which are still primary methods in the current standard is what stops a specification citing a demoted one.<\/p>\n<div id=\"rank-math-toc\" class=\"wp-block-rank-math-toc-block\">\n<h2>Table of Contents<\/h2>\n<nav>\n<ul>\n<li><a href=\"#five-noise-rating-systems-compared\">Five Noise Rating Systems Compared<\/a><\/li>\n<li><a href=\"#where-the-lineage-starts\">Where the Lineage Starts<\/a><\/li>\n<li><a href=\"#nc-1957-tangency-and-wide-adoption\">NC, 1957: Tangency and Wide Adoption<\/a><\/li>\n<li><a href=\"#pnc-1971-the-correction-that-never-landed\">PNC, 1971: The Correction That Never Landed<\/a><\/li>\n<li><a href=\"#rc-1981-straight-curves-and-a-quality-descriptor\">RC, 1981: Straight Curves and a Quality Descriptor<\/a><\/li>\n<li><a href=\"#ncb-1989-the-same-idea-on-a-different-basis\">NCB, 1989: The Same Idea on a Different Basis<\/a><\/li>\n<li><a href=\"#rc-mark-ii-1997-a-finer-description-of-imbalance\">RC Mark II, 1997: A Finer Description of Imbalance<\/a><\/li>\n<li><a href=\"#which-noise-rating-to-use-today\">Which Noise Rating to Use Today<\/a><\/li>\n<li><a href=\"#related-work\">Related Noise Rating Curves Insights<\/a><\/li>\n<\/ul>\n<\/nav>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/altaintegra.com\/wp-content\/uploads\/2026\/07\/01_download-2_jpg.webp\" alt=\"Noise rating curves NC, PNC, RC, NCB and RC Mark II compared across octave bands\" title=\"\"><\/p>\n<h2 class=\"ins-h2\" id=\"five-noise-rating-systems-compared\">Five Noise Rating Systems Compared<\/h2>\n<div class=\"ins-table-wrap\">\n<table class=\"ins-table\">\n<thead>\n<tr>\n<th>System<\/th>\n<th>Year<\/th>\n<th>Range<\/th>\n<th>How the rating is derived<\/th>\n<th>Status in ANSI\/ASA S12.2-2019<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>NC<\/td>\n<td>1957 (Beranek)<\/td>\n<td>63 Hz \u2013 8 kHz<\/td>\n<td>Tangency against a curve family derived from equal-loudness contours<\/td>\n<td>Primary method (expanded NC curves)<\/td>\n<\/tr>\n<tr>\n<td>PNC<\/td>\n<td>1971 (Beranek)<\/td>\n<td>&#8211;<\/td>\n<td>Tangency, less steep at low frequency, steeper at high<\/td>\n<td>Never standardised (effectively retired)<\/td>\n<\/tr>\n<tr>\n<td>RC<\/td>\n<td>1981 (Blazier)<\/td>\n<td>16 Hz \u2013 4 kHz, RC-25 to RC-50<\/td>\n<td>L<sub>MF<\/sub> = (L500 + L1000 + L2000) \/ 3, plus rumble\/hiss\/neutral descriptor<\/td>\n<td>RC Mark II retained in an informative annex<\/td>\n<\/tr>\n<tr>\n<td>NCB<\/td>\n<td>1989 (Beranek)<\/td>\n<td>16 Hz \u2013 8 kHz, NCB-10 to NCB-65<\/td>\n<td>SIL = (L500 + L1000 + L2000 + L4000) \/ 4, plus descriptor<\/td>\n<td>Moved to an annex in current editions<\/td>\n<\/tr>\n<tr>\n<td>RC Mark II<\/td>\n<td>1997 (Blazier)<\/td>\n<td>As RC, flat 16\u201331 Hz<\/td>\n<td>As RC, plus Quality Assessment Index across three regions<\/td>\n<td>Informative annex<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p class=\"ins-p ins-table-caption\">The right-hand column is the one most guides omit. The current standard&#8217;s three primary methods are the A-weighted survey method, expanded NC, and RNC for low-frequency fluctuating noise.<\/p>\n<h2 class=\"ins-h2\" id=\"where-the-lineage-starts\">Where the Lineage Starts<\/h2>\n<p class=\"ins-p\">Every noise rating method rests on two prior developments: an instrument capable of measuring sound repeatably, and frequency discrimination through octave-band analysis. From there the line runs through equal-loudness contours (Fletcher and Steinberg, 1924, and the more widely cited Fletcher and Munson, 1933), to A\/B\/C\/D frequency weighting first standardised in ASA Z24.3-1944, of which A-weighting and C-weighting remain in common use, A reflecting the ear&#8217;s frequency response and C used mainly for peak measurements.<\/p>\n<h2 class=\"ins-h2\" id=\"nc-1957-tangency-and-wide-adoption\">NC, 1957: Tangency and Wide Adoption<\/h2>\n<p class=\"ins-p\">The first NC curve was published by Beranek in 1957, using equal-loudness contours as its reference and evaluated by the tangential method. Its adoption accelerated through inclusion in ASHRAE guidance, which is why it remains the method most mechanical and electrical engineers reach for. It is still the most extensively used and standardised rating in technical literature: covered in more depth in our article on <a href=\"\/insight\/noise-criteria-nc-rating\/\">reading an NC rating<\/a>.<\/p>\n<h2 class=\"ins-h2\" id=\"pnc-1971-the-correction-that-never-landed\">PNC, 1971: The Correction That Never Landed<\/h2>\n<p class=\"ins-p\">PNC addressed a genuine NC weakness: its inability to capture &#8220;hiss,&#8221; high-frequency dominant sound, or &#8220;rumble,&#8221; low-frequency dominant sound. Its curve is less steep at low frequencies and steeper at high frequencies than NC. This gives a better spectral balance.<\/p>\n<p class=\"ins-p\">It failed on economics rather than physics. The tighter low-frequency limits demanded more extensive and more expensive noise control than most buildings could justify, experienced consultants found them impractical, and PNC was never incorporated into a standard. It is the clearest case in this lineage of a technically superior method losing to a buildable one.<\/p>\n<h2 class=\"ins-h2\" id=\"rc-1981-straight-curves-and-a-quality-descriptor\">RC, 1981: Straight Curves and a Quality Descriptor<\/h2>\n<p class=\"ins-p\">ASHRAE&#8217;s mid-1970s background noise survey gave Blazier the data to develop Room Criteria: straight, parallel curves at a constant \u22125 dB per octave, designed to be perceptually neutral, free of any dominant tone.<\/p>\n<p class=\"ins-p\">The rating is calculated in two steps. First, the mid-frequency average level, L<sub>MF<\/sub> = (L500 + L1000 + L2000) \/ 3, which is the RC number itself.<\/p>\n<p class=\"ins-p\">Second, a spectral balance check: low-frequency dominance (16\u2013500 Hz) is labelled rumble, high-frequency dominance (1,000\u20138,000 Hz) hiss, and a balanced spectrum neutral. The same comparison flags where low-frequency energy is likely to cause audible rattling in light building elements such as suspended ceilings, light fittings, doors, windows, ductwork.<\/p>\n<h2 class=\"ins-h2\" id=\"ncb-1989-the-same-idea-on-a-different-basis\">NCB, 1989: The Same Idea on a Different Basis<\/h2>\n<p class=\"ins-p\">NCB spans 16 Hz to 8,000 Hz across NCB-10 to NCB-65, with NCB-0 representing the audibility threshold for continuous sound in a diffuse field. It differs from RC in its calculation basis: the Speech Interference Level, SIL = (L500 + L1000 + L2000 + L4000) \/ 4, rather than the three-band mid-frequency average. Ratings are written NCB XX(YY), using the same rumble\/hiss\/vibration\/neutral descriptor system as RC, though the dB thresholds classifying rumble and hiss differ slightly.<\/p>\n<h2 class=\"ins-h2\" id=\"rc-mark-ii-1997-a-finer-description-of-imbalance\">RC Mark II, 1997: A Finer Description of Imbalance<\/h2>\n<p class=\"ins-p\">RC Mark II refines RC in two ways. Its curve is flat rather than sloped between 16 and 31 Hz. And it replaces simple rumble\/hiss labelling with two calculated quantities: the energy mean spectral deviation factor and the Quality Assessment Index, evaluated across low (16\u201363 Hz), medium (125\u2013500 Hz) and high (1,000\u20134,000 Hz) regions, corresponding to rumble, roar and hiss.<\/p>\n<p class=\"ins-p\">A QAI of 5 dB or less is labelled neutral. Above 5 dB the descriptor reflects whichever region deviates most, with additional vibration descriptors where relevant.<\/p>\n<p class=\"ins-p\">It also adds a subjective response layer, estimating whether occupants are likely to find a given spectrum acceptable, marginal or unpleasant against recommendations for that space type. That estimate is what most distinguishes it from the original RC.<\/p>\n<h2 class=\"ins-h2\" id=\"which-noise-rating-to-use-today\">Which Noise Rating to Use Today<\/h2>\n<p class=\"ins-p\">NC remains the default and the most standardised, and it is a primary method in the current standard. RC, NCB and RC Mark II all offer a spectral-balance descriptor NC lacks, which matters where low-frequency rumble or high-frequency hiss is the actual complaint, but all three now sit in annexes rather than the main body of ANSI\/ASA S12.2-2019, so a specification that names them should say so deliberately rather than assuming co-equal status.<\/p>\n<p class=\"ins-p\">The method the current standard promotes alongside NC is RNC, for low-frequency fluctuating noise with surging or turbulence (the case NC handles least well). ALTA Integra selects the right noise rating method per project through its <a href=\"\/services\/acoustic-consultant\/\">acoustic engineering and design<\/a> practice.<\/p>\n<h2 class=\"ins-h2\" id=\"faq\">FAQ<\/h2>\n<div class=\"ins-faq\">\n<div class=\"ins-faq-item\">\n<p class=\"ins-faq-q\"><strong>What is the difference between NC and RC noise ratings?<\/strong><\/p>\n<p class=\"ins-faq-a\">NC uses the tangential method against a curve family derived from equal-loudness contours. RC uses straight parallel curves at a constant \u22125 dB per octave and adds a rumble\/hiss\/neutral descriptor that NC does not provide. NC reports only the worst band, but RC characterises the spectrum&#8217;s shape.<\/p>\n<\/div>\n<div class=\"ins-faq-item\">\n<p class=\"ins-faq-q\"><strong>Why did PNC curves never become widely used?<\/strong><\/p>\n<p class=\"ins-faq-a\">PNC addressed a real NC weakness in handling hiss and rumble, but its low-frequency limits demanded more expensive noise control than most buildings could justify, and it was never incorporated into a standard. It is a technically superior method that lost to a buildable one.<\/p>\n<\/div>\n<div class=\"ins-faq-item\">\n<p class=\"ins-faq-q\"><strong>What is the difference between RC and NCB?<\/strong><\/p>\n<p class=\"ins-faq-a\">RC uses the mid-frequency average of 500, 1000 and 2000 Hz. NCB uses the Speech Interference Level, averaging 500, 1000, 2000 and 4000 Hz. Both apply a similar rumble\/hiss\/neutral descriptor, with slightly different dB thresholds and separate curve sets.<\/p>\n<\/div>\n<div class=\"ins-faq-item\">\n<p class=\"ins-faq-q\"><strong>Which noise rating methods are current in ANSI\/ASA S12.2?<\/strong><\/p>\n<p class=\"ins-faq-a\">The 2019 edition, reaffirmed 2023, gives three primary methods: the A-weighted survey method, an engineering method using expanded NC curves, and RNC for low-frequency fluctuating noise. RC Mark II and NCB are retained in informative annexes rather than the main body.<\/p>\n<\/div>\n<div class=\"ins-faq-item\">\n<p class=\"ins-faq-q\"><strong>Which method should a project use?<\/strong><\/p>\n<p class=\"ins-faq-a\">NC for most cases, as the default and a primary method in the current standard. RC, NCB or RC Mark II where a spectral-balance descriptor is needed because rumble or hiss is the actual complaint: naming them deliberately, since they now sit in annexes. RNC where low-frequency fluctuating noise is the issue.<\/p>\n<\/div>\n<\/div>\n<h2 class=\"ins-h2\" id=\"references\">References<\/h2>\n<p class=\"ins-p\">1. ANSI\/ASA S12.2-2019 (R2023), Criteria for Evaluating Room Noise (supersedes S12.2-2008, which superseded S12.2-1995).<br \/>\n2. L. L. Beranek, &#8220;Revised criteria for noise in buildings,&#8221; Noise Control, vol. 3, pp. 19\u201327, 1957.<br \/>\n3. W. E. Blazier Jr., &#8220;Revised Noise Criteria for Application in the Acoustical Design and Rating of HVAC Systems,&#8221; Noise Control Eng. J., pp. 64\u201373, 1981.<br \/>\n4. W. E. Blazier Jr., &#8220;RC Mark II: A refined procedure for rating the noise of HVAC systems in buildings,&#8221; Noise Control Eng. J., 1997.<br \/>\n5. G. C. Tocci, &#8220;Room Noise Criteria \u2014 The State of the Art in the Year 2000,&#8221; Noise News International, vol. 8, no. 3, 2000.<\/p>\n<p><!--alta-seo-block--><\/p>\n<h2 id=\"related-work\" class=\"ins-h2\">Related Noise Rating Curves Insights and Project Work<\/h2>\n<p class=\"ins-p\">Further Noise Rating Curves material from ALTA Integra: related technical insights, and the built projects where this engineering was applied.<\/p>\n<ul class=\"ins-related\">\n<li><img decoding=\"async\" src=\"https:\/\/altaintegra.com\/wp-content\/uploads\/2026\/07\/01_nc-graph_png.webp\" alt=\"Noise Criteria (NC) Ratings: How to Read an NC Curve and Convert It to dBA : related noise rating curves work by ALTA Integra\" loading=\"lazy\" title=\"\"> <strong>Insight:<\/strong> <a href=\"https:\/\/altaintegra.com\/insight\/noise-criteria-nc-rating-standard\/\">Noise Criteria (NC) Ratings: How to Read an NC Curve and Convert It to dBA<\/a> (The tangency rule, the octave-band range NC actually covers, and how to turn eight band measurements into a single LAeq value in dBA.)<\/li>\n<li><img decoding=\"async\" src=\"https:\/\/altaintegra.com\/wp-content\/uploads\/2026\/07\/01_measurement-fix_jpg.webp\" alt=\"Acoustic Noise Measurement: Turning a Complaint Into Data You Can Design Against : related noise rating curves work by ALTA Integra\" loading=\"lazy\" title=\"\"> <strong>Insight:<\/strong> <a href=\"https:\/\/altaintegra.com\/insight\/acoustic-noise-measurement\/\">Acoustic Noise Measurement: Turning a Complaint Into Data You Can Design Against<\/a> (Without measurement, a noise fix is a guess, and guesses in acoustics tend to be either over-specified or aimed at the wrong path entirely.)<\/li>\n<li><img decoding=\"async\" src=\"https:\/\/altaintegra.com\/wp-content\/uploads\/2026\/07\/01_ruang-pengukuran-akustik_jpg.webp\" alt=\"Measuring Room Acoustics for Sound Reproduction: Room Response, RT60 and the 300 Hz Problem : related noise rating curves work by ALTA Integra\" loading=\"lazy\" title=\"\"> <strong>Insight:<\/strong> <a href=\"https:\/\/altaintegra.com\/insight\/room-response-measurement\/\">Measuring Room Acoustics for Sound Reproduction: Room Response, RT60 and the 300 Hz Problem<\/a> (Below roughly 300 Hz in a small room, what you measure as reverberation is usually not reverberation at all). Designing from that number introduces error.<\/li>\n<li><img decoding=\"async\" src=\"https:\/\/altaintegra.com\/wp-content\/uploads\/main-hall-bei-3.jpg\" alt=\"Indonesia Stock Exchange Building : related noise rating curves work by ALTA Integra\" loading=\"lazy\" title=\"\"> <strong>Project:<\/strong> <a href=\"https:\/\/altaintegra.com\/project\/indonesia-stock-exchange-building\/\">Indonesia Stock Exchange Building<\/a> (Lobby and trading-floor environments for the Indonesia Stock Exchange), calm, legible, and acoustically controlled.<\/li>\n<li><img decoding=\"async\" src=\"https:\/\/altaintegra.com\/wp-content\/uploads\/museum-nasional.jpg\" alt=\"Museum Nasional Indonesia : related noise rating curves work by ALTA Integra\" loading=\"lazy\" title=\"\"> <strong>Project:<\/strong> <a href=\"https:\/\/altaintegra.com\/project\/museum-nasional-indonesia\/\">Museum Nasional Indonesia<\/a> (Restoration of Indonesia&#8217;s national museum), lighting and audiovisual design that honours the building&#8217;s 1862 heritage while meeting modern conservation and visitor standards.<\/li>\n<\/ul>\n<p><!--\/alta-seo-block--><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Five noise rating systems have shaped building acoustic [&hellip;]<\/p>\n","protected":false},"author":0,"featured_media":949,"template":"","meta":{"_acf_changed":false,"footnotes":""},"subsector":[],"stream":[108],"class_list":["post-948","insight","type-insight","status-publish","has-post-thumbnail","hentry","stream-knowledge"],"acf":[],"_links":{"self":[{"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/insights\/948","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/insights"}],"about":[{"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/types\/insight"}],"version-history":[{"count":5,"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/insights\/948\/revisions"}],"predecessor-version":[{"id":2236,"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/insights\/948\/revisions\/2236"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/media\/949"}],"wp:attachment":[{"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/media?parent=948"}],"wp:term":[{"taxonomy":"subsector","embeddable":true,"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/subsector?post=948"},{"taxonomy":"stream","embeddable":true,"href":"https:\/\/altaintegra.com\/zh\/wp-json\/wp\/v2\/stream?post=948"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}